좋은 가격  온라인으로

제품 세부 정보

> 상품 >
네트워크 스위치
>
3 Layer H3C S5590-EI Series PoE Gigabit Ethernet Switch High Power For Campus Network

3 Layer H3C S5590-EI Series PoE Gigabit Ethernet Switch High Power For Campus Network

브랜드 이름: H3C
모델 번호: S5590-EI 시리즈
MOQ: 1
가격: Subject to the specific model and configuration
지불 조건: 티/티
공급 능력: 최대 45일
상세 정보
원래 장소:
중국
스위칭 용량:
2.4Tbps
패킷 전달 용량:
660Mpps
순간 / SDRAM:
8G/2G
PoE:
PoE++ 지원
입력 전압:
AC: 정격 전압 범위: 100~240V AC: 50/60Hz
전원 공급 장치 슬롯:
2(핫 스왑 가능)
작동 온도:
-5°C ~ 45°C
포장 세부 사항:
특정 모델에 따른 자세한 내용은 하드웨어 사양 시트를 참조하세요.
공급 능력:
최대 45일
강조하다:

High Power PoE Gigabit Ethernet Switch

,

H3C Gigabit Poe Ethernet Switch

,

H3C S5590-EI series switches

제품 설명

H3C S5590-EI series switches are a new generation of high-performance, high-port density, high-security Layer 3 Ethernet switches developed by H3C Technology Co., Ltd. (hereinafter referred to as H3C) using industry-leading ASIC technology, supporting IPv4/IPV6 Dual-stack management and forwarding, support static routing protocols and routing protocols such as RIP, OSPF, BGP, ISIS, etc., and support rich management and security features. It is a Gigabit Layer 3 Ethernet switch product for converged service networks.

In the campus network, H3C S5590-EI series switches can be used as aggregation layer equipment, or as the core of small and medium-sized enterprises; downward can provide high-density GE and MultiGiga ports, upward through 10G/25G/40G/100G fiber or link aggregation is aggregated to the core switch to build a high-performance end-to-end IP network solution together with other H3C products.

H3C S5590-EI series switches include the following models:

  • S5590-24UXM4YC-EI: 16*10/100/1000Base-T Ports (PoE++), 8*10M/100M/1G/2.5G/5G/10G Base-T Ports (PoE++), 4*1G/10G/25GBase-X SFP28 Ports, and 1 Slot;
  • S5590-48UXM4YC-EI: 32*10/100/1000Base-T Ports (PoE++), 16*10M/100M/1G/2.5G/5G/10G Base-T Ports (PoE++), 4*1G/10G/25GBase-X SFP28 Ports, and 1 Slot;
  • S5590-24UXMC-EI: 24*100M/1G/2.5G/5G/10GBASE-T Ports (PoE++), and 1 Slot;
AI-driven PoE
  • Fast PoE: Typically, PIs does not deliver power to PDs the moment the PSE is powered on but wait until the PSE completes startup. Fast PoE enables PIs to deliver power to PDs within few seconds after power is supplied to the PSE.
  • Perpetual PoE: Perpetual PoE continuously monitors the PD states and ensures continued power supply to PDs even when the PSE device is hot rebooting.
  • AI-driven PoE: Innovatively integrating AI technologies into PoE switches, H3C AI-driven PoE enables completely automated, intelligently managed, healed, and optimized PoE, bringing convenient and outstanding PoE experience to users.
Visualization Ability

H3C S5590-EI series switches support Telemetry technology, which can send the switch's real-time resource information and alarm information to the O&M platform through the gRPC protocol.

The platform can realize network quality backtracking, troubleshooting, risk early warning, architecture optimization and other functions to accurately guarantee user experience by analyzing real-time data.

Intelligent Network Quality Analyzer (iNQA)

H3C S5590-EI series switches support iNQA. iNQA provides the following benefits:

  • 3 Layer H3C S5590-EI Series PoE Gigabit Ethernet Switch High Power For Campus Network 0 True measurement results—iNQA measures the service packets directly to calculate packet loss results, thus reflecting the real network quality.
  • Wide application range—Applicable to Layer 2 network and Layer 3 IP network. iNQA supports the network-level and direct link measurement flexibly.
  • Fast fault location—iNQA obtains the packet loss time, packet loss location, and number of lost packets in real time.
  • Applicable to different applications—You can apply iNQA to multiple scenarios, such as point-to-point, point-to-multipoint, and multipoint-to-multipoint.
Multichassis Link Aggregation Group (M-LAG) (Original DRNI)

H3C S5590-EI series switches support M-LAG, which enables links of multiple switches to aggregate into one to implement device-level link backup. M-LAG is applicable to servers dual-homed to a pair of access devices for node redundancy.

  • Streamlined topology: M-LAG simplifies the network topology and spanning tree configuration by virtualizing two physical devices into one logical device.
  • Independent upgrading: The DR member devices can be upgraded independently one by one to minimize the impact on traffic forwarding.
  • High availability: The DR system uses a keepalive link to detect multi-active collision to ensure that only one member device forwards traffic after a DR system splits.
MACsec Hardware Encryption

MACsec (Media Access Control Security, MAC security) defines the method of data security communication based on IEEE 802 local area network. MACsec can provide users with secure MAC layer data transmission and reception services, including user data encryption, data frame integrity check and data source authenticity verification.

MACsec is usually used in conjunction with the 802.1X authentication framework. After the 802.1X authentication process is successful, it identifies the message sent by the authenticated device and uses the MKA (MACsec Key Agreement, MACsec Key Agreement) protocol to negotiate the generated key pair Authenticated user data is encrypted and integrity checked to prevent the port from processing packets from unauthenticated devices or tampered with unauthenticated devices.

H3C S 5590-EI series switches support upgraded MACsec encryption technology and use 256-bit encryption algorithm to further improve data security; All ports of the device provide 256-bit MACsec encryption to ensure data security.

Precision Time Protocol (PTP)

H3C S5590-EI series switches support the 1588V2 function to meet the high-precision time synchronization requirements between network devices. Compared with GPS time synchronization with the same precision, it improves security and lowers deployment costs.

Multi-Service Integration

Based on H3C's Open Service Architecture (OAA), H3C S5590-EI series switches can not only provide the functions of traditional switches, but also integrate security module cards including FW, IPS, and load balancing, mini-iMC cards, and Eagle Vision cards. etc., making the S5590-EI series switches a converged multi-service bearing platform.

Complete Security Control Strategy

H3C S5590-EI series switches support the EAD ( terminal access control ) function, and cooperate with the background system to integrate terminal security measures such as terminal antivirus and patch repair with network security measures such as network access control and access authority control into a linked security The system, through the inspection, isolation, repair, management and monitoring of network access terminals, makes the entire network change from passive defense to active defense, from single-point defense to comprehensive defense, and from decentralized management to centralized policy management. , worms and other emerging security threats overall defense capabilities.

H3C S5590-EI series switches support centralized MAC address authentication, 802.1x authentication, support dynamic or static binding of user identification elements such as user account, IP, MAC, VLAN, and port, and implement user policies (VLAN, QoS, ACL) dynamic distribution; support with H3C's iMC system for real-time management of online users, timely diagnosis and disintegration of illegal network behavior.

H3C S5590-EI series switches provide enhanced ACL control logic, support large-capacity ingress and egress port ACLs, and support VLAN-based ACL delivery, which simplifies the user configuration process and avoids waste of ACL resources. In addition, H3C S5590-EI series switches will also support unicast reverse path finding technology (uRPF). The route between the interface and the source address specified in the packet is to verify its authenticity. If it does not exist, the packet is deleted, so that we can effectively prevent the source address spoofing that is increasingly flooding in the network.

Hardware Specifications
Feature S5590-24UXM4YC-EI S5590-48UXM4YC-EI S5590-24UXMC-EI
Port Switching Capacity 792Gbps 984Gbps 880Gbps
Packet Forwarding Capacity 660Mpps 660Mpps 660Mpps
Switching Capacity 2.4Tbps 2.4Tbps 2.4Tbps
Dimensions (W*D*H) (unit: mm ) 440*400*44 440*400*44 440*400*43.6
Weight ≤6.8kg ≤7kg ≤7.5kg
Console port 1
Flash/SDRAM 8G/2G
Packet Buffer 4.5M
Ethernet port for management 10/100/1000Base-T electrical port: 1
USB port 1
10/100/1000BASE-T port (PoE++) 16 32 -
10M/100M/1G/2.5G/5G/10G Base-T Ports (PoE++) 8 16 24
1G/10G/25GBase-X SFP28 4 4 -
Expansion card slot 1
PoE PoE++ support
Input voltage AC: Rated voltage range: 100 to 240V AC: 50/60Hz
Power Supply slots 2(Hot swappable)
Machine leakage current Meet UL60950-1/EN60950-1/IEC60950-1 /GB4943 standard
Working temperature -5 ºC to 45 ºC
Relative humidity of working environment (non-condensing) 5 % to 95 %
Software Specifications
Feature S5590-EI Series Switches
Ethernet Configuration

Cross-device link aggregation

Static aggregation

Dynamic aggregation

AutoMDIX

LRM (Long Reach Multimode) (LSWM4SP8PM can support LRM transceiver)

Speed Auto/Manual

Duplex Auto/Full/Half

Port Characteristics

Support IEEE802.3x flow control (full duplex)

Supports storm suppression based on port rate percentage

Supports PPS-based storm suppression

Support bps-based storm suppression

MAC address table

Support black hole MAC address

Supports setting the maximum number of port MAC addresses to learn

VLAN

Access/Trunk/Hybrid VLAN

Port-based VLAN support

MAC-based VLAN

IP subnet-based VLAN

Protocol-based VLAN

IEEE 802.1P(CoS priority)

Super VLAN

Private VLAN

Voice VLAN

Support QinQ, flexible QinQ

Support VLAN Mapping

Support Private VLAN

Support Voice VLAN

QinQ (802.1Q-in-802.1Q)

VLAN mapping

Static/Dynamic/Blackhole/Multiport unicast MAC

MAC automatic learning and aging

Port-based/VLAN-based MAC learning limit

MAC filter

Port isolation

VLAN ID range 0 to 4095(Total 4096)

IEEE 802.3x flow control (full duplex)

Storm suppression based on port rate percentage

PPS -based storm suppression

bps -based storm suppression

LLDP (Link Layer Discovery Protocol) and LLDP-MED (Link Layer Discovery Protocol Media Endpoint Discovery)

Broadcast/multicast/unknown unicast storm constrain

Jumbo frame

Store-and-forward (Default)

Layer 2 Ring Network Protocol

Loop detection (VLAN and VXLAN network)

MVRP (Multiple VLAN Registration Protocol)

GVRP (Generic VLAN Registration Protocol)

PVST (Per-VLAN Spanning Tree) (compatible with PVST+/RPVST+)

Support STP/RSTP/MSTP

Support SmartLink

Support RRPP

Support ERPS (G.8032) Ethernet ring network protection switching

BPDU/root/loop/TC-BPDU/PVST BPDU/disputeloopback guard

BPDU filter

Role/TC-BPDU transmission restriction

Support port single-pass detection, Edge Port

IRF2 Intelligent Resilience Architecture

Support IRF2 Intelligent Resilience Architecture (fast convergence within 50ms)

Support distributed device management, distributed link aggregation, distributed elastic routing

Supports stacking via standard Ethernet interfaces, etc.

Supports local stacking and remote stacking

IP Services

Static/Dynamic/Gratuitous/proxy ARP

ARP snooping/fast-reply/direct route advertisement/ping

ARP attack detection

ARP source suppression

Ping, Tracert

DHCP (Dynamic Host Configuration Protocol)

DHCP Server/relay agent/client/snooping

DHCP Option 43, Option 82, and Option 184,

DNS (Domain Name System)

DDNS (Dynamic Domain Name System)

mDNS (Multicast Domain Name System)

IRDP (ICMP Router Discovery Protocol)

UDP helper

ND (Neighbor Discovery)

ND snooping/proxy/direct route advertisement/ping

DHCPv6 Server/relay agent/client/snooping/guard

GRE (Generic Routing Encapsulation)

HTTP redirect

GRE tunneling

VXLAN tunneling and VXLAN-DCI tunneling

IPv4/IPv6 over IPv4 tunneling, and IPv4/IPv6 over IPv6 tunneling

IPv4/IPv6 Fast Forwarding

IP routing

Support static routing

Support RIPv1/v2, RIPng

Support OSPFv1/v2, OSPFv3

Support BGP4, BGP4+ for IPv6

Support IS-IS, IS-IS V6

Support equal-cost routing, policy routing

Support VRRP/VRRPv3

Support O SPF multi-process, MD5 encryption authentication, S TUB/NSSA area

Support route COST setting, support inter-area route filtering

IPv6

Support IPv4/IPv6 dual stack protocol

Support ND (Neighbor Discovery)

Support PMTU

Support IPv6-Ping, IPv6-Tracert, IPv6-Telnet, IPv6-TFTP, IPv6 - ICMP, IPv6 -DNS, IPv6-FTP, IPv6-NTP

Support manual tunnel, automatic tunnel

IPv4 support over IPv6 tunnel

Support 6to4 tunnel

Support ISATAP tunnel

Support GRE tunnel

Multicast

PIM-DM, PIM-SM, PIM-SSM, and Any-RP

PIM snooping

IGMPv1/IGMPv2/IGMPv3

IGMP proxying

IGMP Snooping

IGMP snooping proxying

IGMP Filter and IGMP Fast leave

IPv6 PIM-DM, PIM-SM, PIM-SSM, and Any-RP

IPv6 PIM snooping

MLDv1/MLDV2

MLD proxying

MLD Snooping

MLD snooping proxying

Multicast routing and forwarding

Multicast VLAN

MVPN (Multicast VPN)

Multicast policy and Multicast QoS

Support MSDP, MSDP for IPv6

Support MBGP, MBGP for Ipv6

Mirror

Stream mirroring supported

Support N:4 port mirroring

Supports local and remote port mirroring

Support ERS PAN

ACLQoS

Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function, provide based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, Traffic Classification for VLANs

Support Time Range ACL

Supports bidirectional ACL policies in inbound and outbound directions

Supports issuing ACLs based on VLANs

Supports limiting the rate at which the port receives packets and the rate at which it sends packets

Support message redirection

Diff-Serv QoS

Eight queues each interface

802.1p, TOS, DSCP, and EXP priority mapping

802.1p and DSCP priority re-marking of packets

Support CAR (Committed Access Rate) function

Support flexible queue scheduling algorithm, can be set based on port and queue at the same time, support SP, WFQ, SP+WFQ three modes

Traffic shaping

Time ranges

Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN

Congestion avoidance, Tail-Drop, RED (Random Early Detection) and WRED (Weighted Random Early Detection)

MPLS

Static LSP (label switched path)

LDP (Label Distribution Protocol)

IPv6 LDP

Tunnel policies

VRF (Virtual Routing and Forwarding)

Support MPLS MCE

MPLS support L3VPN

MPLS support L2VPN

MPLS support SR

MPLS Ping/Tracert

MCE (Multi-VPN Instance Customer Edge)

IPv6 MCE

MPLS OAM

VxLAN

Support VxLAN Layer 2 and Layer 3 gateways

Support VxLAN routing

Centralized VXLAN gateway

Distributed VXLAN gateway

VXLAN M-LAG

VXLAN-DCI

OVSDB (Open vSwitch Database)

VXLAN VTEP

MP-BGP EVPN control plane

EVPN VXLAN

EVPN M-LAG

Safety features

Support RBAC (Role-based access control)

Support user hierarchical management and password protection

Support 802.1X authentication / centralized MAC address authentication

Support Portal authentication

Support Guest VLAN

Support AAA (Authentication, Authorization, and Accounting)

Support RADIUS authentication

Support HW TACACS+ certification

Support MAC authentication

Support Web authentication

Support Triple authentication

Support Guest VLAN

SSH1.x and SSH2.0(Secure Shell)

SSL (Secure Sockets Layer)

HTTPs

Support port isolation

Support port security

Support EAD

Support SAVI and SAVA to ensure the security of IPv6 environment

Support DHCP Snooping to prevent spoofed DHCP server

Support dynamic ARP inspection to prevent man-in-the-middle attacks and ARP denial of service

Support BPDU guard, Root guard

Support uRPF (Unicast Reverse Path Detection) to prevent IP source address spoofing and prevent viruses and attacks

Support IP/Port/MAC binding function

Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS)

Attack detection and prevention

TCP attack prevention

IPSG (IP source guard)

IPv6 RA Guard

ARP attack protection

ND attack protection

MFF (MAC-forced forwarding)

SAVI (Source Address Validation Improvement)

FIPS (Federal Information Processing Standards)

MACsec (Media Access Control Security) All ports AES256 MACsec

Microsegmentation

Hierarchical user management and password protection

Basic and advanced ACLs for packet filtering

Support OSPF, RIPv2 message plaintext and MD5 ciphertext authentication

Support PKI (Public Key Infrastructure, public key infrastructure)

Network Management

NQA (Network quality analyzer)

iNQA (Intelligent Network Quality Analyzer)

eMDI (Enhanced Media Delivery Index)

Performance management through gRPC or NETCONF

NTP (Network Time Protocol)

Support hot patch function, online patch upgrade

Support XModem /FTP/TFTP loading and upgrading

Support command line interface (CLI), Telnet, Console port for configuration

Support netcool network management platform

Support SNMPv1/v2/v3, RMON (Remote Monitoring)

BFD support for VRRP/IS-IS/BGP/RIP/OSPF/Static Routing

Support iMC intelligent management center

Support Syslog, system log, hierarchical alarm, debug information output

NTP support

Support power alarm function, fan, temperature alarm

Support Ping, Tracert

Support VCT (Virtual Cable Test) cable detection function

Support DLDP (Device Link Detection Protocol) unidirectional link detection protocol

Port mirroring SPAN (Switch Port Analyzer)/RSPAN (Remote SPAN)

Flow mirroring

N:4 port mirroring

local and remote port mirroring

sFlow

Information center

NETCONF/YANG (XML-based network management protocol)

Support Python script management operation and maintenance

Support Loopback-detection port loopback detection

Support NetStream function, traffic analysis sampling ratio 1:1

Supportbuilt-inWebGUI

Support secure boot

OpenFlow

OpenFlow 1.3

Multiple controllers (EQUAL, master/slave)

Multiple tables flow

Group table

Energy Saving

Port automatic power down function

Port timing down function (Schedule job)

Support EEE (802.3az) energy saving standard

Performance Specification
Entries S5590-EI Series Switches
MAC address entries max 320K
VLAN table 4K
VLAN interface 4093
IPv4 routing entries max 80K
IPv4 ARP entries 65015
IPv4 ACL entries

IN: 3.25K

EG: 0.75K

IPv4 multicast L2 entries 8K
IPv4 multicast L3 entries 4K
IPv6 unicast routing entries 32K
QOS forward queues 8
IPv6 ACL entries

Ingress: 1.625K

Egress: 0.375

IPv6 ND entries 32K
IPv6 multicast L2 entries 8K
IPv6 multicast L3 entries 4K
Jumbo frame length 13312
MAX num in one link group 64
Link group num 256
Max Stacking Members 9
Max Stacking Bandwidth 480Gbps
PoE Power Capacity
Power supply 1 Power supply 2 S5590-24UXM4YC-EI S5590-48UXM4YC-EI
Total PoE power capacity PoE Ports Quantity Total PoE power capacity PoE Ports Quantity
PSR600-54A-B  / 450W 15.4W (802.3af): 24 450W 15.4W (802.3af): 29
30W (802.3at): 15 30W (802.3at): 15
60W (802.3bt): 7 60W (802.3bt): 7
90W (802.3bt): 5 90W (802.3bt): 5
PSR920-54A-B  / 770W 15.4W (802.3af): 24 770W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 25
60W (802.3bt): 12 60W (802.3bt): 12
90W (802.3bt): 8 90W (802.3bt): 8
PSR1600-54A-B (Input Voltage: 90V AC~176V AC)  / 770W 15.4W (802.3af): 24 770W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 25
60W (802.3bt): 12 60W (802.3bt): 12
90W (802.3bt): 8 90W (802.3bt): 8
PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC)  / 1450W 15.4W (802.3af): 24 1450W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 24
90W (802.3bt): 16 90W (802.3bt): 16
PSR600-54A-B PSR600-54A-B 1020W 15.4W (802.3af): 24 1020W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 34
60W (802.3bt): 17 60W (802.3bt): 17
90W (802.3bt): 11 90W (802.3bt): 11
PSR600-54A-B PSR920-54A-B 1020W 15.4W (802.3af): 24 1020W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 34
60W (802.3bt): 17 60W (802.3bt): 17
90W (802.3bt): 11 90W (802.3bt): 11
PSR600-54A-B PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1020W 15.4W (802.3af): 24 1020W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 34
60W (802.3bt): 17 60W (802.3bt): 17
90W (802.3bt): 11 90W (802.3bt): 11
PSR600-54A-B PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 1020W 15.4W (802.3af): 24 1020W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 34
60W (802.3bt): 17 60W (802.3bt): 17
90W (802.3bt): 11 90W (802.3bt): 11
PSR920-54A-B PSR920-54A-B 1600W 15.4W (802.3af): 24 1600W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 26
90W (802.3bt): 17 90W (802.3bt): 17
PSR920-54A-B PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1260W 15.4W (802.3af): 24 1260W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 42
60W (802.3bt): 21 60W (802.3bt): 21
90W (802.3bt): 14 90W (802.3bt): 14
PSR920-54A-B PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 1600W 15.4W (802.3af): 24 1600W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 26
90W (802.3bt): 17 90W (802.3bt): 17
PSR1600-54A-B (Input Voltage: 90V AC~176V AC) PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1600W 15.4W (802.3af): 24 1600W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 26
90W (802.3bt): 17 90W (802.3bt): 17
PSR1600-54A-B (Input Voltage: 90V AC~176V AC) PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 1600W 15.4W (802.3af): 24 1600W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 26
90W (802.3bt): 17 90W (802.3bt): 17
PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 2850W 15.4W (802.3af): 24 2850W 15.4W (802.3af): 48
30W (802.3at): 24 30W (802.3at): 48
60W (802.3bt): 24 60W (802.3bt): 47
90W (802.3bt): 24 90W (802.3bt): 31

 

Power supply 1 Power supply 2 S5590-24UXMC-EI
Total PoE power capacity PoE Ports Quantity
PSR600-54A-B  / 450W 15.4W (802.3af): 24
30W (802.3at): 15
60W (802.3bt): 7
90W (802.3bt): 5
PSR920-54A-B  / 770W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 12
90W (802.3bt): 8
PSR1300-54D-B  / 1150W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 19
90W (802.3bt): 12
PSR1600-54A-B (Input Voltage: 90V AC~176V AC)  / 770W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 12
90W (802.3bt): 8
PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC)  / 1450W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 16
PSR600-54A-B PSR600-54A-B 1020W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 17
90W (802.3bt): 11
PSR600-54A-B PSR920-54A-B 1020W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 17
90W (802.3bt): 11
PSR600-54A-B PSR1300-54D-B 1020W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 17
90W (802.3bt): 11
PSR920-54A-B PSR920-54A-B 1600W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 17
PSR920-54A-B PSR1300-54D-B 1600W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 17
PSR920-54A-B PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1260W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 21
90W (802.3bt): 14
PSR920-54A-B PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 1600W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 17
PSR1600-54A-B (Input Voltage: 90V AC~176V AC) PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1600W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 17
PSR1300-54D-B PSR1300-54D-B 2320W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 24
PSR1300-54D-B PSR1600-54A-B (Input Voltage: 90V AC~176V AC) 1480W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 16
PSR1300-54D-B PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 2320W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 24
PSR1600-54A-B (Input Voltage: 90V AC~176V AC) PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 1600W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 17
PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) PSR1600-54A-B (Input Voltage:176V AC~290V AC or 180V DC~320V DC) 2400W 15.4W (802.3af): 24
30W (802.3at): 24
60W (802.3bt): 24
90W (802.3bt): 24